Whatever is going on is specific to the PSoC 6 kit. But still no luck.Īnd: Other serial devices are working fine in the terminal. This Thread describes apparently the same error:īut the fix there that is the accepted solution is simply to restart the computer, which does not work in our case.Īlso: I've run the update manager to see if there was a new driver. I have tried connecting to the port with both computers from PuTTY and both computers give the same error: The device shows up on both in the Device Manager under 'Ports (COM & LPT)' and driver says it is Cypress v.2.0.0.2 If you have an APU2/3/4 router and you want to reinstall the operating system or do some troubleshooting, here are the steps you need to follow. You can use other serial programs and set communication parameters. Serial connection with putty on Windows OS If you are trying to connect with a USB-to-DB9F cable (null-modem / serial cable) on Windows using putty, you are in the right place. I have installed PSoC Creator on two different computers both running Windows 10. In this example we will use PuTTY SSH Client that is available for both Windows and Linux. The device seems to program up fine with the example UART code, but I have no way to test it because I cannot connect to the serial port of the device from PuTTY or any other terminal. I'm on lesson 2-1 and have hit a snag trying to communicate with the device over the UART. Control panel -> system to check what serial ports you have (com) and that it is enabled. I using the PSoc 6 Pioneer kit to go through the PSoC 101 video series.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |