![]() As part of the study, the porosity distribution in the plate cast was assessed by taking samples for measurements from the center and edge of the casting. Prior to the commencement of experimental studies, numerical simulations of solidification were made for the selected alloy (AlSi7Mg) in order to determine the potential locations of shrinkage porosity. The tests were carried out on 200x100x25mm plates squeeze casted under 90MPa pressure. The results of researches on porosity and structure of castings from AlMg9, AlSi7Mg and AlCu4Ti alloys produced by squeeze casting and for comparison by gravity die casting are presented. Armii Krajowej 19, 42-200 Częstochowa, Poland ![]() ![]() Czestochowa University of Technology, Department of Metallurgy and Metal Technology, Al. ![]() Manufacturing Technology 2021, 21(5):725-734 | DOI: 10.21062/mft.2021.074 Comparison of the Porosity of Aluminum Alloys Castings Produced by Squeeze Casting Andrzej Zyska ORCID., Kinga Boroń ORCID. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |